Innovative new products at Electronica - Booth# B5 312 -
Exxelia will be exhibiting at Electronica, the biggest global trade fair for electronic components, which will take place from November 8th to 11th in Munich, Germany. On its booth # B5 312, the company will be showcasing a bunch of innovative new ranges.
Felsic HV, long lifetime and high voltage screw terminal
The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume.
Cost-effective common-mode chokes qualified for aerospace
Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries.
Ceramic capacitors based on the new C48X dielectric
New range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10-4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability.
Ultra low ESR, high RF power and high self-resonant frequency
The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment.
New Plug&Play filters for datacenters and mission critical facilities
Electronic equipment can leak sensitive information over conducted or radiated electromagnetic emanations, and signals transmitted down unprotected lines can potentially be intercepted. That’s why filters are implemented into systems to prevent EMI disturbances, as TEMPEST filters stop the high frequency EM signals (or noise) emanating inside the secured environment. Exxelia has a long history of manufacturing state-of-the-art electromagnetic interference (EMI) filtering technologies for space, avionic and defense markets. Thanks to this in-depth knowledge, Exxelia came to the conclusion that the installation of a product is as critical as its reliability, especially when shielding continuity and sensitive copper terminals are involved. That’s where Exxelia’s new full range of TEMPEST pluggable filters will save time and spare headaches! The 9260W series is a multi-socket line extension with a built-in 16A Tempest filter (minimum 60dB, from 100KHz to 1GHz), CE qualified according to EM 60950-1 standard. 9260W series Plug&Play solution is available with UK, US and EU standard plugs and can be provided with any other standard plug upon request. In addition, Exxelia completed its offer with the 9259W series of pluggable filters featuring various plug interfaces such as VGA/DVI, USB, Ethernet, Phone, Audio and much more. 9260W series and 9259W series are both fully compliant with EMC expectations and allow considerable time saving and cost-effectiveness. When a standard filter needs to be wired and shielded to each socket one-by-one before carefully re-closing the whole equipment, Exxelia new series can be installed using no special tools and with a smaller footprint. To all people handling sensitive information, a simple plugging operation is now enough to protect their data. Available now, 9259W and 9260W series are fully customizable upon request.
Exxelia at PCIM
Two new ranges of MIL-qualified tantalum capacitors: MIL39006/22 & MIL39006/25 The recently introduced ranges of MIL-qualified tantalum capacitors will be showcased on the company booth. MIL 39006/22 and MIL 39006/25 respectively equivalent to CLR79 and CLR81 types featuring hermetically sealed cylindrical tantalum cases and axial leads are available in T1, T2 T3 and T4 cases with extended capacitance and voltage ratings. MIL 39006/22 is qualified for voltages from 6V to 125V and provides from 1200µF @6V to 56µF @125V. MIL 39006/25 is qualified for voltages from 25V to 125V and delivers from 680µF @25V to 82µF @125V. Both ranges combine high energy density with a large operating temperature range of -55°C - +125°C and H vibrations and shocks resistance. PHM 912, very high energy density film capacitors PHM 912 is a new standard series of film capacitors based on a novel metallized plastic film dielectric from Dupont Teijin®. The PHM 912 capacitors are specifically designed for DC filtering or energy storage. Very stable in both temperature and frequency, they are well-adapted for applications such as filtering in H.F. switch mode power supplies, DC link or decoupling. The range can withstand temperatures up to 155°C and up to 175°C in custom version. With their high energy density, these capacitors allow highly integrated power filters. Their compact construction results in a low ESR, ESL and excellent high current and frequency performances. The series provides 250V @68µF and 0,27µF @1000V. The PHM 912 series makes significant advances over previous technologies by combining the benefits of excellent temperature resistance with superior energy densities, making it one of the most compact capacitors on the market. Felsic HV, long lifetime and high voltage screw terminal aluminum electrolytic capacitor The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density combined with ultra-long lifetime. For instance, 6 800µF @450V fit into a volume of Ø77x220mm and can withstand 200,000 hours between 0 to 70° under 37Amps, which makes them the perfect choice for use in rolling stock traction systems or the CVS. The family also has one of the lowest ESR of its class with less than 10m0hms in most cases. Products are available for voltages from 160 to 450Vdc, and offer capacitance values from 1500μF up to 47 000μF offering the best compromise between reliability and compactness.