Exxelia at Space Tech Expo – Booth #5009
Exxelia is pleased to exhibit at Space Tech Expo 2017 in Pasadena, California. From May 23th to 25th at booth # 5009, Exxelia will be showcasing innovative solutions dedicated to space applications.
100% invar tuning screws with self-locking system
Invar-36 is a unique Iron-Nickel alloy (64 % Fe / 36 % Ni) sought-after for its very low coefficient of thermal expansion. With 1.1 ppm. K–1 between 0°C and 100°C, Invar-36 is about 17 times more stable than Brass which is the most traditional and common alloy Tuning Elements are made of. The working temperature range in Space is so wide that this property becomes essential for a reliable and stable cavity filter tuning. Self-locking system is a technology commonly used on Tuning Element made of Brass or other soft “easy-to-machine” alloys but is innovative and pretty advanced when applied to hard and tough Invar 36. The design consists of two threaded segments separated by two parallel slots. After cutting both parallel slots, the rotor is compressed in its length in order to create a plastic deformation. Thus, an offset is induced between the two threaded segments which generates a constant tensile stress in the rotor from the moment threaded segments are screwed.
High power and high frequency ceramics with the new C48X dielectric
Range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10–4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability.
Magnetic components based on adaptive CCM technology
Exxelia designed CCM technology to respond to the growing interest of electronic engineers for inductors and transformers with multiple outputs, high power density and reduced footprint.
Qualified for aeronautic and space applications, the CCM product line features terrific robustness. The CCM technology adapts to most every need, even the harshest environments, including VIGON® resistance. The series offers five different sizes, allowing optimized component design in a pick-and-place surface mount (SMD) package. Through-hole (TH) packages are also available upon request. CCM transformers and inductors can operate over a wide temperature range with a minimal temperature of -55° C. The standard thermal grade of the technology is 140° C. The epoxy molding protecting the winding ensures a lower temperature gradient and a better heat dissipation. Each unit is thoroughly tested with a dielectric withstanding strength of 1,500 VAC.
Low Voltage 0402 MLCCs now in ESA QPL
Exxelia ranges of low voltage MLCC for surface mounting, CEC19 and CNC19, have achieved the Qualified Part List (QPL) status under the criteria of the European Space Component Coordination’s (ESCC) 3009/042 and 3009/043 respectively. The case size 0402 QPL-qualified parts are available from 10V to 25V, enabling substantial miniaturization and cost-saving. Dielectrics are based either in the very stable NPO (type 1) or the high capacitance X7R (type 2). CEC and CNC series combine high capacitance values with high thermal and voltage stability. Versions with polymer terminations are also QPL-certified. These ranges of versatile chip capacitors are intended for use in a wide variety of aerospace applications requiring the highest level of reliability: satellites, launch vehicles, payloads, etc. CEC19 features: - very stable NPO dielectric - maximum capacitance values: 330pF in 10V, 120pF in 16V and 100pF in 25V, - large operating temperatures: -55°C to 125°C CNC19 features: - high capacitance X7R dielectric - high capacitance rating values: from 68pF to 12nF in 10V, 8.2nF in 16V and 5.6nF in 25V - large operating temperatures: -55°C to 125°C