Exxelia EMI-RFI feedthru filters are available in C, L, Pi and T cells and can be either soldered or screwed. Designs with diameters from 3 to 17 mm can be achieve depending on the required performance. Exxelia is the sole ESA qualified manufacturer for feedthru EMI-RFI filters.

FP 030

FP 030

Main Features

  • Silver plated
  • Glass or resin sealing
  • Threaded package

Typical Applications

  • Power supply
  • Data signal

Markets

Technical Characteristics

Current

  • Up to: 10 A

Voltage

  • Minimum : 25 V
  • Maximum : 200 V

Insertion Loss

  • Minimum : 0 dB
  • Maximum : 70 dB

Capacitance

  • Minimum : 200 pF
  • Maximum : 44000 pF

Temperature

  • Minimum : -55 °C
  • Maximum : 125 °C

Dimensions (OD)

  • OD: 3 mm

Mounting

  • Solder-in

Sealing

  • Glass & Resin

Notes

  • No special note

Related Standards

RoHS

ESA

3008 compliant

Related Documents

Technical Papers

3D Models

  • No Model

Frequently Asked Questions

Related to this product

Q: How is a Pi Filter Built?

<p>A three-section filter consisting of two feedthrough capacitors to ground with a series inductor between them. The Pi filter is usually symmetrical, as are all the Pi filters in this catalog, but circumstances sometimes warrant use of asymmetrical Pi circuits. A Pi filter has attenuation characteristics that increase at 60 dB per decade from its cutoff frequency to at least that frequency where it exhibits a minimum attenuation of 80 dB. It maintains this level at higher frequencies.</p>

<p><strong>Pi-Only Filters are the choice when high levels of attenuation are required and both the input &amp; output impedances are similar.</strong></p>

This website uses cookies for statistics purposes. By continuing to browse the site you are agreeing to our use of cookies.