Exxelia EMI-RFI feedthru filters are available in C, L, Pi and T cells and can be either soldered or screwed. Designs with diameters from 3 to 17 mm can be achieve depending on the required performance. Exxelia is the sole ESA qualified manufacturer for feedthru EMI-RFI filters.

DC T CIRCUIT

DC T CIRCUIT

Main Features

  • DC Voltage Rated

Typical Applications

  • Power supply

Markets

Technical Characteristics

Current

  • Up to: 15 A

Voltage

  • Minimum : 50 V
  • Maximum : 300 V

Insertion Loss

  • Minimum : 5 dB
  • Maximum : 80 dB

Capacitance

  • From: 0,5 µF

Temperature

  • Minimum : -55 °C
  • Maximum : 125 °C

Dimensions (OD)

Mounting

  • Not available

Sealing

  • Not available

Notes

  • No special note

Related Standards

MIL

-PRF-15733 compliant

Related Documents

3D Models

  • No Model

Frequently Asked Questions

Related to this product

Q: How is a T Filter Built?

<p>A three-section filter consisting of two series-connected inductors between the input and output terminals, with a feedthrough capacitor between them from line to ground. The T filter is usually symmetrical (identical inductive elements), but circumstances sometimes warrant use of asymmetrical circuits. A T filter has attenuation characteristics that increase at 60 dB from its cutoff frequency to at least that frequency where it exhibits a minimum attenuation of 60 dB.</p>

<p><strong>T-only filters are the choice when both the input and output impedances are low.</strong></p>

This website uses cookies for statistics purposes. By continuing to browse the site you are agreeing to our use of cookies.